Horizontal Fluid Friction Plant — MOE Lab Tender Details

Horizontal Fluid Friction Plant

Teaching objectives:
Study of the principal elements in an installation of piping.
Measurement of pressure losses generated by these various elements by means of manometric panel or/and electronic probe with transmitter.
Visualization of the flows in the pressure reducing conduits and orifices
Observation of the modes of laminar flow and turbulent according to the flows and pressures
Study of the regular pressure losses of:
Piping of various diameters
Piping smooth and rough
Piping rising, downward and tilted
Study of the individual pressure losses of:
Elbows of various angles
abrupt increase or reduction of the piping diameter
various valves
Calibration of the pressure reducing orifices (venturi, diaphragm)
Measurement of the flows by pressure reducing orifices (venturi, diaphragm)
Determination of Cv of the valves.

Technical specifications:
Frame stainless equipped with casters, including two brakes
A tank in transparent PVC with draining valve
 An industrial stainless body centrifugal pump
A rotameter
A membrane valve for controlling the flow
Two pipe sections with diameters of 20 and 25 mm.
Two pipe sections with a diameter of 15 mm, smooth and rough
A piping with variable slope
Elbows with 45°, 90° large and small ray and 135°
A widening and an abrupt reduction Dn15-Dn25, in Altuglass
A membrane valve
A ball valve
A cap valve
A diaphragm in Altuglass
A Venturi tube in Altuglass
A device of dye injection
A manometric panel with single and U-tubes.
A differential pressure sensor.
A control cabinet on/off of the pump and protection
A set of manual valves
Handbook technical and teaching.

Equipment package:
A manometric panel for the measures of the pressure losses in the main system.
U-tubes to measure the differential pressures in the diaphragm and the venturi.
4 manometers for the measures of pressures between the valves and a manometric panel.
A manometric panel for the measures of the pressure losses in the main system.
A differential pressure sensor for pressures measurements in the diaphragm, the venturi and in valves.
A differential pressure sensor with display for all the pressures measurements.

Options :
– Temperature probe and indicator
– Programmable indicator for calibration of diaphragm and venturi.